Lift the lower control arm up with a jack and put a jack stand under it. remove the cotter pin and nut from the lower ball joint. Jack up the vehiclel high enough to put a jack stand under the fram instead of the lower control arm. Jack the vehicke high enough to remove the stand under the lower control arm. Using a ball joint seperator tool, separate the ball joint assembly from the lower control arm.
The lower has a (mount) lip on it keeping it in. You will have to grind the rivets holding it on in order for it to fall out. The new lower ball will come with a mount
that will hold it place. replace all the parts by bolting on the new mount withthe included bolts and nuts,and you have it done saving you $400.
Dodge Durango was created in 1998.
Is it an African Durango or a European Durango? The Curb weight (ie without cargo or passengers) of the 1998 Dodge Durango is approximately 4700 pounds (2127 kg).
Yes
The Dodge Durango was introduced in 1998, therefore this question cannot be answered as is. However, the 1998 durango had a curb weight of 4689 lbs.
Línea Coahuila Durango was created in 1998.
No.
The rear hatch on a 1998 dodge durango won't open
Get a big hammer and beat the lower ball joint out from the top of the lower control arm then look at the new ball joint make sure they match before you press them in.
The first Dodge Durango was the 1998 model year.
NO.
How do you change shift cylinoid on 1998 dodge Durango
No.No.