55
Same as changing the rear brake pads. Only difference would be the T-55 Torx needed to remove the caliper bolt.
pull the wheel off, remove the two caliper bolts, remove the caliper and the rotor can be removed
What size Allen socket is needed to remove bolt from caliper on 2004 ford escape
Front or rear, remove wheel, remove caliper, remove caliper bracket, remove rotor.
Remove wheel Re-install 2 lug nuts to hold rotor in place Remove flexible brake line Remove caliper mounting bolts Slide caliper off rotor
Hose?
Remove the wheel, remove the two caliper bolts and hang the caliper with a wire or bungee cord: you don't want any pressure on the brake hose. Then remove the two caliper carrier bolts and remove the carrier. The rotor just slides off after that.
Remove the wheels Remove the caliper mounting bolts Slide caliper off rotor Rotor should slide of center hub
Remove wheel Remove caliper mounting bolts Caliper should slide off rotor Rotor should slide off of hub
to remove the front rotors u must first remove the caliper and caliper frame then remove the nut in the center of rotor rotor should fall off then hope this helps fordtech
1. jack car and remove wheel 2. remove the brake caliper and pads by removing the two bolts holding on the caliper 3. remove the mounting bracket for the brake caliper by removing the two bolts attaching it to the spindle. 4. pull the rotor off
If it is a V8 then there are 2 of them and they are under the intake manifold. You have to remove intake to service them.