0
What size ball joint socket is needed for the upper ball joints on a 1997 Dodge b3500 with the 3600 front axle?
Wiki User
∙ 15y ago
the big one. Go to Advance Auto Parts or Autozone and rent their ball joint press kit. It'll have a socket. You'll need a 3/4" drive socket wrench (Or a 1/2" to 3/4" adapter) and a long pole to slip over the handle.
Wiki User
∙ 15y ago
Add your answer:
Earn +20 pts
Whats the firing order for a 1981 Dodge 318 in a b3500 van?
its 18436572 its 18436572 clockwise
Can a dodge B3500 van be towed?
The rear wheels need to be in the air, or the drive shaft removed.
What is the oil capacity on a dodge ram van b3500?
5 quarts for the V-8 engines.
Where is the ECM on a 1998 dodge B3500 van?
The engine computer is under the hood, centered below the windshield.
What is the spark plug firing order of a Dodge B3500 Ram van?
1-8-4-3-6-5-7-2.
Tow capacity of a 2000 dodge B3500 15ps?
Dunno what 15ps is, but with a 5.9L V8 and 4-speed, 3.55 gears, it's about 10,000 pounds.
Where is Blower Motor Resistor on a 1998 dodge b3500?
It's under need the glove box .Where the carpet meets the cover panel. if you sit as a pasenger by your feet .
Which cylinder is 1 on 1999 dodge ram van b3500 maxi 5.2 L CNG?
Front driver sideFront driver side
Why would a 1998 dodge ram van 1 ton van not engage in reverse?
This is a common problem on the B3500 van. The first thing to do is wiggle and jiggle the shifter. There is an adjustment in the automatic transmission shifting linkage. A mechanic adjusted this when I bought my 1998 1 ton Dodge van (it had the problem at only 18k miles).
Can you put a 47rh transmission in a 1994 b3500 ram van?
No, will not bolt up. You need a 46rh
How do you change a keyed ignition on a 1993 B3500 Dodge ram van?
you have to pull the steering wheel off and once you do you will locate the ignition collander. there should be a slot with a place to push in a tab. that will release the collander and you put the new one in and put it back the way you took it apart. JH
What is the overdrive dash switch on a 96 dodge b3500 ram van used for Is there a specific benefit to driving with it off or on Can the transmission be damaged by not using it?
The main use is for turning the OD off when towing.The main use is for turning the OD off when towing.
