what size are the bolts that hold a starter on a 1995 f 250 powerstroke
most likely a 10mm or a 3/8"
What size starter bolts for an 1993 Ford F250 4x4 automatic
17 mm to take off the cable, 12 point 10 mm for the starter bolts.
Depends On What The Starter Is From. Car Model Engine Size, Or Mounting Bolts Ect. If It Is The Bolts That Assemble The Starter< You Can Get These At A Starter Alternator Shop. The Mounting Bolts. Drop By The Dealer Parts House They Can Fix You Up.
What size is the starter bolt on 6.5 turbo diesel starter?
the starter is on transmission's side above the right drive axle It bolts on close to where the transmission bolts to the engine. It's held on by a few bolts and is about the size of a 12 oz pop can. You should be able to see it without getting under the car.
It's on the transmission, two 14mm bolts.
The 1997 Chevy Cavalier starter bolt size is 9/16 by 3.5" inches long. You will need three starter bolts to secure the starter.
I think a 13MM
Bolts might come loose from the transmission pan while you are driving your 1987 Ford Aerostar because they have not been torqued to specified tightness. They might also come loose because the bolts are not the right size or are worn.
A 1995 Ford Aerostar either has a 3.0 liter or a 4.0 liter V6 engine ( The 3.0L has the engine oil filter on the drivers side of the engine and the 4.0L it is on the passenger side of the engine )