The power steering pressure switch, on a 1993 Chrysler New Yorker, is located below the power steering pump. The pressure switch is attached to the power steering reservoir mounting bracket.
It uses regular power steering fluid.
You can use power steering fluid or ATF.
Plain old power steering fluid.Plain old power steering fluid.
A 2013 Chrysler uses power steering fluid +4, or ATF+4.
A good quality power steering fluid from any auto parts store will work. If you are not near a store with power steering fluid you can substitute a good tranmission fluid for Chrysler vehicles. BE CAREFUL AND CHECK THE YEAR , ACCORDING TO CHRYSLER'S 1985 MANUAL, NEVER , NEVER, NEVER USE TRANSMISSION FLUID IN THE POWER STEERING PUMP, POWER STEERING FLUID ONLY.
plain old power steering fluid is the recommended type
ATFATF
i was acctually an unbeliever when a service advisor from the Chrysler jeep and dodge dealership told me this but what he had told me that every vehicle they service they run ATF (automatic transmission fluid) in the power steering.
No but you can use atf,trany fluid
It is important to know how to add fluids to a car. Power Steering fluid is added to the container under the hood, that is capped with a yellow lid that says "Power Steering".
It does not have a drain plug.