answersLogoWhite

0


Best Answer
Answer

YOU NEED TO TAKE THE VEHICLE BACK TO WHOEVER "FIXED" IT. If you did the job yourself go look in the mirror and repeat "I am NOT a Mechanic".

make sure it is in drive

User Avatar

Wiki User

14y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: What is wrong if gas pedal depressed but car does not move and rolls backward on incline just had a trasmission job?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

What is the brake pedal reserve distance?

It is the distance between floorboard and pedal top, when the brake pedal is fully depressed (after applying brakes).


Why would an icon on the dashboard comes on when the brake pedal on a 1997 Toyota Camry is depressed?

A dashboard light appearing when brake pedal is depressed usually means brake fluid is low.


How do you fix the brake lights on a 2000 Ford Contour that stay on while the car is off?

check the brake pedal, there is a switch on the back of the pedal that depressed when the brake is depressed that turns the lights on, when this is loose it keeps the lights on.


Does the BMX bike has breackes?

most bmx bikes dont have front brakes now ans if you pedal backward and it has pedal brakes its not a bmx bike


Why wont your 87' trooper start When key is in on position it beeps but nothing else when cranked?

Is your clutch pedal depressed? If it is, check switch on clutch pedal.


Car would not start until gas pedal is depressed?

If the vehicle is equipped with a fuel injection system, it may be clogged. When a vehicle has fuel injection, the gas pedal does not need to be depressed to get it started. It sounds like the vehicle needs to be taken to a mechanic.


How do you fix a 92 Thunderbird that starts and runs weakly then dies when the gas pedal is depressed?

By A Chevy


What is an ICV?

An icv is an idle control valve. It controls the idle of the car (without the accelerator pedal depressed).


How do you get a 4runner out of park?

Shifter is blocked by a device attached to the brake pedal. If the brake pedal is not depressed it wont allow you to change out of park. There should also be a bypass button next to the shifter, in case the cable to the pedal breaks.


Why does the brake lights constantly stay on for a Nissan Pulsar lx?

It is because the brake light switch under the brake pedal is faulty. usually replacing this will solve the problem. it is designed in such a way that when the brake pedal is depressed the switch completes a circuit and the lights come on. the fault occurs when the switch closes the circuit even though the pedal is not depressed. hope this helps.


89 troopers clutch mastercylinder was leaking replaced it shortly after your truck acted like the clutch was not depressed can you start the truck with out the pedal or what else is wrong with it?

Try adjusting your pedal


Where is the backup light switch on a 2002 Chevy pickup truck?

It should be at the top of your brake pedal it will look like a little push button switch the releases when the pedal is depressed