answersLogoWhite

0


Best Answer

18436572 #1 is on the d side front then 3,5,7 moving to the rear starting in the other side from the front its 2,4,6,8 looking at the dist. the #1 plug wire is the 2ed turning clockwise from the hot and tach hookup in the side of the cap

User Avatar

Wiki User

15y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: What is the spark plug wire sequence for a Chevy V8?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

What is the spark plug wire sequence on a 1990 vw cabrio?

what is the spark plug wire sequence to a 1990 vw cabrio. send picture if possible?


Why does 1997 Chevy Blazer miss out when you accelerate?

Could be a faulty spark plug or spark plug wire.


Spark plug wire pattern Chevy?

What engine and what year?


What is a plug boot for a Chevy Tracker 1999?

That is the rubber boot that is on the end of the spark plug wire that goes onto the spark plug.


Spark plug wire diagram for small block Chevy?

1,8,4,3,6,5,7,2.


What spark plug goes to which plug wire on a 1998 Chevy truck?

Need to know what engine you have.


How do you remove the spark plugs in a 88 Chevy Celebrity v6?

Remove the spark plug wire. Using a 5/8" spark plug socket with appropriate extension and driver unscrew the spark plug and remove it. The spark plug gap should be set to .045". Replace spark plug and reattach wire.


Where can you find a spark plug wire diagram for a Chevy Cavalier?

What year and what engine?


What is the spark plug wire sequence for a 1994 Ford Escort 1.9 liter please show the spark plug to distributor cap diagram?

The 95 lx sequence is 1,3,4,2. Not sure if this helps or not, but may be a try.


What is the spark plug wire pattern for a 1989 Chevy 350 engine?

18436572 clockwise


Why does older 1995 Chevy 3500 idle and rev fine but skip during accelerating?

Could be a faulty spark plug or spark plug wire.


How do you change the spark plugs in a 1987 Chevy Celebrity?

To change the spark plugs in a Chevy Celebrity: 1. Give the spark plug boot a twist to free it up from the spark plug, then pull on the boot to remove the spark plug wire from the spark plug. 2. Use a 5/8" spark plug socket with an extension and ratchet or breaker bar to loosen then remove the spark plug. 3. Set the gap on the new plug to .045" then screw it back into the spark plug hole in the head. Tighten the spark plug and replace the spark plug wire. I change the spark plugs one at a time to keep from getting the spark plug wires on the wrong spark plug.