Wiki User
∙ 12y agoWiki User
∙ 12y agoLow pressure port. BTW, it contains no Freon. It contains R134a refrigerant.
The truck doesn't have a freon pressure gauge. That is a tool that the repairman/mechanic has.The truck doesn't have a freon pressure gauge. That is a tool that the repairman/mechanic has.
You will definitely lose all of your Freon when you replace the high pressure switch. Once the high pressure switch is loosen the Freon will begin to access the system.
Connect the pressure gauge to the high pressure port. Discharge your Freon into the low pressure port. Stop the Freon discharge when the Freon engage reaches the appropriate level.
You can add Freon to your 1999 Chevy cooling system through the low pressure port. Connect your Freon bottle to the low pressure port and release the Freon into the system.
yes there is a seal on the front of compressor that can go bad and leak freon.
You put Freon in a 1994 Jeep Cherokee XJ through the low pressure feed to the air compressor. You will want to look for the hose with the green cap to determine you have the right location.
you dont considering you replaced the condensor and opened up the pressure in the system. It needs to be taken to a shop that can vacumn out the system so it will take all the freon it needs. If you do not do this, you ac will be half as cold.
what is the pressure in the gauge with outside 90 degree temperature with freon 22
You can put Freon into your 1997 Nissan Pathfinder from the low pressure port. Connect the Freon bottle to the port. Release the Freon into the air conditioning system.
The 2002 ford Ranger uses type R134 Freon. The Freon is added in the low pressure port of the ac system.
The foam is atomized oil. Crankcase oil flows with the freon.