365 ci
If my math is correct , just over 311 cubic inches ( using a 3.875 inch bore and 3.250 inch stroke bored out 30 thousand )
If my math is correct : using a 4 inch bore and a 3.48 inch stroke , with the cylinders bored .060 , just over ( 360 cubic inches )
8.1 liters would be just over 494 cubic inches
377
If my math is correct , almost 293 cubic inches ( using a 4 inch bore that is bored out .030 and a 2.87 inch stroke )
If my math is correct , just over 362 cubic inches ( 4 inch bore x 3.5 inch stroke , bored .060 inches )
Boring a 396 engine 0.030 inches over increases its displacement by approximately 17.7 cubic inches.
It's exactly 360.42 Cubic InchesStock Stroke is 3.48 60 over is 4.060 BoreTo make a 383 stroker you need a 3.75 inch stroke crank, and 4.030 BoreActual displacement is 382.67 Cubic Inches
If my math is correct , almost 410 cubic inches ( using a 4 inch bore and a 4 inch stroke that has been bored out .040 )
Its a 355 cubic inch
It is about 446 cid
A 350 bored 40 over is a automobile engine which has had its displacement increased to 383 cubic inches. This results in more power without needing to purchase a new engine.