There are four ways to find a ratio.
1 A dealer can normally tell from the vin number.
2 There are normally tags or labels on the axle that have part number, gear ratio, and fluid requirement
info.
3 You can count how many times you have to turn the driveshaft to get one complete turn of the tires.
4 You can divide the number of teeth on the ring gear and divide by number of teeth on the pinion.
The ratio is on a tag on front and rear axle between 2 of the cover bolts
1984-1993 Jeep Cherokee XJ Rear Axle 1987-1993 Jeep Wrangler YJ Rear Axle 1986-1992 Jeep Comanche Rear Axle
What size axle does a 99 wrangler sport have
3.07 or 3.73 to 1. Could be either.
if it is a 4 cylinder 5 speed probably 4.10 ratio.that what mine had in it but changed to 4.88
how to replace the slave cylinder on a 1993 jeep wrangler
In order to determine what axle and axle gears you have there will be a metal tag that is stamped with the gear ratio on the cover bolts and Dana has a number raised on the right bottom side where the axle tube enters the pumpkin. Between the two it will tell you what axle and ratio you have. If you have a limited slip then you axle ratio would read 3L55 instead of 3 55
Jeep Wrangler only,
The correct factory tire size for a 1993 Jeep Wrangler is 215/75R15.
Could be either 3.07 to 1 or 3.73 to 1 Both were an option.
no it will not, the frame is slightly smaller in the earlier jeeps
How to change a clutch and master cylinder on a 93 jeep wrangler