0
I believe they all came with 16" x 8" with P225-60R16s. The max size rim would have to consider the tire profile you use. I would ask a tire and wheel place as to what combination would work. A very low profile tire would require an 18" or maybe even a 20" rim to match overall circumference with the stock tire. You can probably increase the width to perhaps a 9" rim with P245 tires without wheel well interference. You also need to keep the wheel inset (dish) spacing to avoid wheel bearing damage and having the tires sticking out from the wheel wells. A lot of enthusiasts like the look of the low profile 20R- or 30R- tires on larger rims, but these do not have good road hazard and pothole handling, and many turn into ice skates on wet or icy roads. They also cost a lot more. Believe it or not, the engineers at GM probably have put the best overall wheel/tire combination on the car already.
Add your answer:
Earn +20 pts
What size are the Wiper blades for Oldsmobile intrigue?
22in
What is the rear speaker size for a 2001 Oldsmobile intrigue?
6x9
What size fuel tank for a 2001 Oldsmobile intrigue?
17 gal
What tire size do you need for an Oldsmobile Intrigue?
The tire size is P225/60R16 for most Intrigues.
WHAT SIZE tires are on a 1999 Oldsmobile intrigue?
P 205/65/16
What other vehicles have the same rim size as the Oldsmobile Intrigue?
Yes 16" Most common size now.
What size socket removes half shaft cv joint on 1999 Oldsmobile intrigue?
I believe it's a 35mm
What size bulb goes in the headlights of a 2002 Oldsmobile intrigue?
9006 for the low beam, 9005 for the high beam
What size light bulb goes in the headlights of a 2002 Oldsmobile intrigue?
9006 low beam, 9005 high beam
What is the size of the door speakers in a 2001 Oldsmobile intrige?
they are 5.25 inch round just replaced mine in a 99 intrigue.
What size bulb do I need for the front headlight of a 2002 Oldsmobile intrigue?
Low beam is a 9006 bulb, high beam is a 9005.
Need to know size of socket to replace the CV joint axle in a 1998 Oldsmobile intrigue?
32mm or 1"1/4
