It sends a signal to the engine computer to tell it the rotational position and speed of the camshafts. The computer uses that information for fuel and spark timing.
It sends a signal to the engine computer to tell it the rotational position and speed of the camshafts. The computer uses that information for fuel and spark timing.
It is bolted to the bell housing on the passenger side.
Passenger side of the bell housing, behind the engine.
It is on the front driver side of the timing cover.
Trouble code P0340 means:Camshaft position sensor circuit malfunction
It is on the passenger side of the transmission bell housing, just behind the engine.
With an o2 sensor socket.
No.
Bank one is the passenger side on a Concorde. Sensor one is before the catalytic converter.
It is a sensor that reads the rotational position of the camshaft. The engine computer uses that to control ignition and fuel timing.
The Crank position sensor is located on the right side behind the wheel about midway up the motor eaiseier to get to from the bottom with 10mm socket one bolt
A 1995 Chrysler Concorde only has one oxygen sensor on each side. They are screwed into the exhaust manifolds.
Passneger side of the bell housing.