0
Add your answer:
Earn +20 pts
Will a 93 Chevy Suburban 5 bolt rim fit on a 2000 Chevy Monte Carlo?
NO it will not. The stud pattern is different.
Does the rims on a 1999 Honda odeyssa fit 1999 Chevy suburban?
Not hardly, It will not work. Wheel stud patterns are different.
What is the bolt pattern on a 2008 Chevy suburban 1500 4x4?
The wheel bolt pattern for the 2008 Chevy Suburban 1500 4x4 is 6 x 5.5 inches or 6 x 139.7 millimeters. The stud size is 14 x 1.5, and the hub center bore is 78.3.
How do you remove and install a wheel stud on a 2002 Chevy Venture van?
You will have to remove the caliper and rotor. Then. use a hammer and a punch to drive the stud out through the back of the hub. Take the broken stud with you to a parts store where they can match you up with a new one. Hit the old one out with a hammer and use a nut and an impact wrench to install the new one
How do you change front wheel stud on Chevy 1992 s10 blazer?
The front wheel stud on a 1992 Chevy Blazer S10 can be changed by jacking the vehicle up, removing the wheel, and unbolting the caliper. The rotor assembly can then be removed, and the wheel stud pressed or hammered out of its seat.
How do you remove a stripped rocker arm stud from a 350 Chevy?
To remove a pressed-in stud, you usually stack up a few washers and crank the stud out with an impact wrench on the nut. If the threads are completely stripped all the way down, you may have to take the head to a machine shop and have the stud drilled out and tapped for a screw-in stud.
What is the stud pattern on a 2002 vw passat?
5 x 112 i think.
How do you replace front wheel stud bolt on 1996 suburban?
Jack up the vehicle and put a safety stand under it. Take the wheel off. With a hammer hit the stud on the tip, several blows should knock it loose. The stud can be pulled out from the rear. Slide a new stud into place, and put to two or three washers on it. thread the nut on, then tighten it. The nut will pull the stud in tight. Remove the nut and washers, then remount the wheel.
Will rims on a 1996 Chevy caprice fit a 2009 Chrysler 300?
No, They will not, Different stud pattern.
What is the size of Chevy 4.3 v6 exhaust manifold stud bolts.?
10mm x 1.5
How do you jump start a 2002 Dodge Intrepid?
You put the red cable on the red stud by the air filter. You put the black cable on the ground stud on the strut tower.
Do the rims for my 2002 Town and Country have to be hub centric?
The factory wheels are. Aftermarket wheels will probably stud center.The factory wheels are. Aftermarket wheels will probably stud center.
