I found this on another website... you might have a recall:
Article No.
03-11-3
06/09/03
ELECTRICAL - AIRBAG WARNING LAMP
ILLUMINATED WITH DIAGNOSTIC TROUBLE CODE
(DTC) B2292
Ford:
2002-2003 EXPLORER
2002-2003 MOUNTAINEER
ISSUE
Some 2002-2003 4Dr Explorer/Mountaineer vehicles may exhibit an air bag warning lamp illuminated with Diagnostic Trouble Code (DTC) B2292 and Light Flashing Code (LFC) 33 (Driver seat pretensioner fault) OR LFC 34 (Passenger seat pretensioner fault). This may be caused by intermittent pretensioner connection at either seat belt buckle.
ACTION
Install pretensioner kit for affected side(s) by build date/color. Refer to the following Service Information for details.
SERVICE INFORMATION
Obtain correct Service Kit and refer to instruction sheet included with kit for installation instructions.
2002 Model Year Through 3/3/02 Build Dates
^ Medium Dark Parchment 1L2Z-78610E22-AAA
^ Midnight Black 1L2Z-78610E22-AAB
^ Dark Graphite 1L2Z-78610E22-AAC
2002/2003 Model Years 3/4/02 Through 1/17/03
^ Medium Dark Parchment 1L2Z-78610E22-BAA
^ Midnight Black 1L2Z-78610E22-BAB
^ Dark Graphite 1L2Z-78610E22-BAC
OTHER APPLICABLE ARTICLES: NONE
WARRANTY STATUS: Eligible Under The Provisions Of Bumper To Bumper Warranty Coverage
OPERATION DESCRIPTION TIME
031103A Install Pretensioner Wiring 1.3 Hrs.
Kit One Front Seat
(Includes Time To Remove
And Install Seat And To
Perform
Deactivation/Reactivation)
031103B Install Pretensioner Wiring 1.6 Hrs.
Kit Both Front Seats
(Includes Time To Remove
And Install Seat And To
Perform
Deactivation/Reactivation)
031103C Install Pretensioner Wiring 1.5 Hrs.
Kit One Front Seat
(Includes Time To Remove
And Install Seat And To
Perform Deactivation And
Reactivation - With Canopy
Air Bag)
031103D Install Pretensioner Wiring 1.8 Hrs.
Kit Both Front Seats
(Includes Time To Remove
And Install Seat And To
Perform Deactivation And
Reactivation - With Canopy
Air Bag)
DEALER CODING
CONDITION
BASIC PART NO. CODE
7861202 X2
Trouble code P0171 means:System too lean (Bank 1)
Trouble code P0171 means:System too lean (Bank 1)
That code is manufacturer specific...I would need to know the vehicle information. 2002 ford windstar v6 3.8l
Trouble code P0174 means: Fuel System Too Lean (Cylinder Bank 2)
The 2002 Ford Windstar ECU can be found on the firewall in the engine compartment. The ECU will be on the drivers side of the firewall.
I was looking at the 2002 Ford Windstar Owner Guide and it shows : ( 5W-20 is recommended )
According to the 2002 Ford Windstar Owner Guide : ( 98.4 litres / 26.0 U.S. gallons )
That's your LOW tire pressure warning light in a 2002 Ford Windstar
In a 2002 Ford Windstar : ( # 17 ) is a 20 amp fuse for the cigarette lighter / powerpoint and the Datalink connector
According to the 2002 Ford Windstar Owner Guide : With engine oil filter change ( 5.0 quarts )
On a 2002 Ford Windstar : firewall 1-----2-----3 4-----5-----6 front of vehicle > driver
i put on Scan cyinder 2 misfire on ford windstar 3.8 liter year 2002