daytime running lights
The indicator panel should by carefully pried out. Then you can change the bulb.
It has one on the panel. The first indicator.
The high beam indicator light will be located on the right side of the instrument panel. It is in the same housing as the check engine, choke, brake, and seat belt indicator lights. The high beam indicator is the only blue one, making it easier to find.
Malfunction Indicator Light On Dash Panel i.e.: Service Engine Soon Brake Check gauges Oil Charging system etc.
The fuse panel on the Virago is under the instrument light cluster that surrounds the ignition switch where the neutral indicator light is located.
Brake pad wear indicator on left side of steering wheel. Glow plug indicator on right side.
there is no gauge that shows trans temp, but there is an indicator light on instrument panel that will light up "trans temp" if abnormal
might need to reset the problem indicator
A blinking light or a display panel with an armed status indicator (such as a red light or a message saying "armed") typically indicates that a house alarm is armed. Some alarm systems may also have an external indicator light on the keypad or control panel that shows whether the system is armed.
There are three, if it is in the middle at the bottom of the row of indicator lights then its the check engine light. If it is above the fuel gauge then its either the low fuel light or the abs light.
The dome light fuse on a 2003 Jeep Liberty can be changed by first locating the fuse panel near the hood release. The dome light fuse can then be pulled from its socket and a new fuse put in place.