0
You can Deactivate the Belt Minder two ways. First, you can deactivate it temporarily for your current "run cycle", that is after you have started your car and it's still running. Second, you completely deactivate the Belt Minder so that it never reminds you again, or at least until your reactivate it... The first method, temporary deactivation, or one time disable: After you have started your vehicle, buckle and then un-buckle your safety belt. Be sure to buckle back up.... This will disable the Belt Minder only for that ignition cycle. The second method, permanent deactivation: There are 9 steps you need to follow to deactivate or activate your Belt Minder system. Before doing so, make sure that: The parking brake is set. The truck/car is in Park (automatic), Neutral (manual). The ignition is OFF. All doors are closed. The driver's safety belt is un-buckled. The parking and headlights are OFF. Then follow these 9 steps: Turn the ignition switch to ON, but DO NOT START. Wait for the safety belt warning light to go OFF(1-2 minutes). Steps 3-5 MUST be completed within 60 seconds! Buckle, then un-buckle the driver's safety belt 3 times, ending with the belt un-buckled. Turn on the headlights, turn off the headlights. Buckle, then un-buckle the driver's safety belt 3 times, ending with the belt un-buckled. After step 5, the Safety Belt Warning Light will be turned on for 3 seconds. Within 7 seconds of the safety belt warning light turning OFF, buckle then un-buckle the safety belt. This will disable the Belt Minder if it is currently enabled, or enable the Belt Minder if it is currently disabled. Confirmation of the disabling of the Belt Minder is provided by flashing the safety belt warning light 4 times per seconds for 3 seconds. Confirmation of the enabling of the Belt Minder is provided by flashing the safety belt warning light 4 times per seconds for 3 seconds, followed by 3 seconds with the safety belt light off, then followed by flashing the safety belt light 4 times per second for 3 seconds again. After confirmation, the deactivation/activation of the Belt Minder procedure is complete.
Add your answer:
Earn +20 pts
How do you disable the seatbelt alarm on a vw jetta?
== == There is a website where you can purchase a seatbelt alarm silencer for only $20, and it's completely legal!! www.clickercheater.com On my MKIV Jetta, the seatbelt alarm quits sounding after about 3 minutes. The warning light also goes out at that time, too.
How do you fix a seatbelt warning light and alarm on a fiat grande punto. My seatbelt is on but the warning light and beep keep sounding?
Hi have the same issue sometimes, im looking to see if VAG-K-CAN interfaces will do the trick
Where is the seatbelt alarm fuse in a 2006 dodge ram?
There isn't a separate fuse. The warning comes out of the cluster and can not be turned of.
How do you disable impreza seatbelt alarm?
Buckle your seatbelt!
Which fuse do you remove on the Nissan qashqai to turn off the seatbelt alarm?
How do you turn off seatbelt alarm Nissan qashqai
How do you disable seatbelt light and alarm on a 2005 Toyota camery?
By wearing the seatbelt.
What fuse disarms the alarm on a 2000 Chrysler Sebring convertible?
There is no single fuse. The alarm is disarmed by unlocking the doors with the key or the remote.
How do you disable the seat belt alarm in a 2008 mondeo?
Ignition on (do not start motor) Buckle seatbelt 9 times and then unbuckle seatbelt Ignition off Seatbelt alarm is now disabled
How do you disable the anti-theft alarm in maruti estilo?
it automatically disarms when u unlock the car
How do you diable the seatbelt alarm on a Toyota 2009 Camry?
Put your seatbelt on. Should be an easy fix.
The seatbelt alarm whines until you buckle up The alarm successfully?
negatively reinforces you.
The seatbelt alarm whines until you buckle up. The alarm successfully?
negatively reinforces you.
