Remove wheel, remove cotter pin at bottom of tie rod, remove castle nut. Separate tie rod from spindle. Unscrew tie rod, Screw in new one, seat in spindle, install castle nut, install cotter pin, install wheel, go get a beer.
Remove wheel, remove cotter pin at bottom of tie rod, remove castle nut. Separate tie rod from spindle. Unscrew tie rod, Screw in new one, seat in spindle, install castle nut, install cotter pin, install wheel, go get a beer.
Castellated nuts are used with bolts that have holes drilled in them for cotter pins or safety wire. To torque one, first you bring the fastener to the published torque...say it's 90 lb-ft. You then tighten it just enough more to make the holes accessible to the cotter pins or the safety wire, and install the locking device.
It has slots in the top of the nut to used with a cotter pin. Looks a lot like the top of the Rook piece from a chess game ( which some refer to as the castle).
straighten and pull out cotter pin turn counter clockwise
install a cotter pin in the hole in the shaft of the ball joint
Dawn Cotter goes by Cotter.
Brad Cotter's birth name is Thomas Bradley Cotter.
Dawn Cotter's birth name is Dawn Marie Cotter.
Jared Cotter's birth name is Jared Lincoln Cotter.
It is always easier to remove a castle nut if you can remove the cotter pin first. Sometimes this is not easy and may require a punch hammer technique and lots of penetrating oil. If all else fails you can sometimes shear off the cotter pin by simply forcing the nut to loosen with a wrench if the tapered stud is still firmly stuck in the tapered socket.
Remove wheel, remove dust cap, should be a castle nut with a cotter key, remove key and castle nut. if memory serves, the drum should come off now.