torque spec on the oil drain plug on a 2.9 ford ranger?
.044 inch , according to ford parts . com ( it should show the spark plug gap on the vehicle emission control information decal in the engine compartment )
the gap spec is .054
The spark plug torque spec range is between 6 and 10 ft/lbs.
.044 is the spec, i suggest use KNG spark plug brand .044 is the spec, i suggest use KNG spark plug brand
removed plug wire, remove spark plug, gap new plug to spec. and reinstall. Repeat for every other cylinder. Would recommend replacing plug wires, cap and rotor when replacing spark plugs.
spark plug gap is .032
RD350 Spark plug gap & Plug spec. 0.022 to 0.025" NGK B8HS
The correct spark plug gap for a 84 suzuki lt50 is 0.028 this is the factory spec.
Check the service manual for proper torque spec.
The spark plug gap should be set to the manufacturers spec, regardless of vehicle.
Check the Vehicle Emissions Control Information ( VECI ) decal located in the front of the engine compartment ( it will show the type of spark plugs to use and the spark plug gap )