DON'T REMOVE THE STEERING WHEEL! Its called "combination switch" and wheel removal is unnecessary Remove the upper column trim cover(it just pops off) Unscrew the tilt lever. Remove the bottom column trim cover by removing the three 7mm screws on the bottom trim piece (underneeth)... now you can get to the two screws that hold the combination switch on. One on top and one on the bottom. The top is easy but the bottom one you can use a small 7mm socket and wire plires.
dimmer switch is on the turn signal lever, to replace you need to remove steering wheel
grip it firmly and pull it straight out,new one pushes back in.
Turn signal lever.
I would replace the turn signal switch.
Grasp lever and pull straight out. it goes back in, by pushing it in.
the switch is in the lever pull backwards or push forward on lever once released
Most likely one of the cables is loose or broken. On mine the cable came lose inside of the turn signal lever so the module wouldn't get the signal that it had been turned on.
It is the turning signal lever. Pull it towards you.
nevermind
on the turn signal lever it is a small slide switch
pull or push the turn signal lever.
lever pulled out, having trouble getting the lever locked back in place