You need to remove the window hand crank with a window hand crank removal tool.
To replace the window crank handle on the 1993 Geo Prism, first remove the interior door panel. Then, access the screw that holds the window crank in place and remove it. You can then remove the handle itself.
The interchangeable part for a 1994 Mustang window crank handle would be a 1991 to 1993 Mustang window crank handle. This part can also be found at some salvage yards for automobile parts.
They sell a window crank removal tool to open the cotter in and slide off the winow crank handle. Slide the tool under the window handle and push the cotter pin back, off comes the handle
behind the window crank handle, there is a horseshoe shaped pin, pop that pin off and the crank handle should pull right off.
behind the window crank handle, there is a horseshoe shaped pin, pop that pin off and the crank handle should pull right off.
You can remove the window crank handle by just using a simple shop rag. How you do this you slide the rag(unfolded) between the door panel and window crank and rotate around the window crank until you snag the clip that is retain the window crank. The clip is a simple wire clip shaped like a "C" To reinstall you place the clip back in the groove on window crank and press back on the window regualtor shaft
How to Remove or Install Car Window Crank Handles check related link below
If there is no faster head visible then it likely is attached with a clip on the backside of the crank handle. slip the handle between the handle and door panel to remove the clip.
There is a "U" shaped clip on the handle. That is all that holds it on.
Well, to answer my own question... :-) There is a "U" shaped clasp that you pull off the crank right behind the handle. Very simple! Then.. when putting the window crank back on, just put the clasp on the handle, then push it on the crank! It'll click right in. Happy Fixin'!
With a hammer and pry bar.