To remove the steering wheel from your 1985 Chevy Celebrity: First remove the horn button. There should be a keeper at the tip of the steering shaft, remove it. Remove the nut that holds the wheel in place. Use a steering wheel puller to actually remove the steering wheel.
You can replace a steering wheel cover by first removing the old steering wheel. Once complete, wash and dry clean the steering wheel and then apply your new steering wheel cover.
Removing the steering wheel by hand is hard. A person needs a steering wheel pulled to remove the steering wheel of this car. It applies pressure to the middle of the steering wheel and pulls up on the rest of it.?æ
A person removes the steering wheel with a steering wheel puller, after removing the airbag to the car. Then they put the new steering wheel on the car, after aligning it correctly.
Use a spring compressor to push the lock plate down slightly, then remove the circlip that keeps the plate on. Release the spring compressor and the lock plate will come off. Reverse the procedure to reinstall.
You can remove the steering will, on your Ford Ranger pickup truck, by removing the steering wheel pin. Remove the wiring harness and the steering wheel will come off.
There are two different steering wheels available for a 1986 Chevy Celebrity. One was the standard steering wheel, the other came on Eurosprt models. They are quite different so I need to know which one you have to answer your question.
To remove the steering wheel in a 1988 Chevy Celebrity standard version: !. Remove the screws that hold the horn pad in place then remove it. Unplug the wire at the connector. 2, If it still has the safety clip remove it. 3, Use the appropriate wrench to remove the nut from the steering shaft. 4. Use a steering wheel puller to loosen then remove the steering wheel. Reverse the instructions to replace the steering wheel. Steering wheel retainer nut should be 30 ft. lbs. torque.
Removing the steering wheel is a difficult task to do by hand alone. A person needs to buy a steering wheel puller, follow the directions on the package, it will help remove the steering wheel by apply pressure to the middle of the steering wheel and by pulling the rest of it up.
Disconnect the negative battery terminal before removing the steering wheel.
After removing screws from the back side of the wheel and removing the center cover (there are probably some wires to disconnect also), you can then remove the nut holding the wheel to the column shaft and attach a steering wheel or gear puller to remove the wheel.
youll have to remove the air bag pad and horn contact pad and steering wheel. there is then underneeth a steering lock plate , yull need a steering wheel puller for(also for remoal of the steering wheel) and also to depress the spring loaded lock plate to remove the c-clip then slowlly release the pressure on the lock plate and remove it underneah will be the signal light switch assmbly.