Alot! I did it for a client and charged $50 thinking it was a easy access pan. WRONG! It requires dropping the sub-frame from under the car while supporting the engie from up top. The bottom mount suppport its a real bear to put back on. I had my bro help me by pushing on the back of the bolt while I turned it. Other wise the bolt between the enging and the axle housing would of been left out. It took me from 8pm to 5am so, I suspect it would be 6 hours labor at a shop x $80 per hour plus parts. I left the oil pick gaske alone since the torx hole was filled with carbon. You will need 4 jacks stands (2) 2x4 pieces of wood and a chaing to supporth the engine. Set of extra hands at some point. A ratcheting box end, flex head 15mm wrench would help on that mount too.
video to learn how to replace the engine gasket..upper & lower gasket for 1999 Monte Carlo.
How do i replace the purge valve on a 1999 Chevy Monte Carlo
You need to replace your intake manifold gasket. Chevy had a bad problem with these gaskets.
How to replace head gasket on 05 3.4 monte carlo
If you have it done it will be at least $1,000.
There is no such thing as a 2008 Monte Carlo, so the answer would be no.
I would recommend getting a chilton's manual. not to tough of a job, just make sure you have you heads checked.
chevy 2003 monti carlo how to replace a cooling fan assembly
how do i replace the fuel pump and the tools i will need
Water pump removal chevy monte carlo 3.8
No
Yes