0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
How do I reset oil change light on 2007 corvette?
go to your oil percentage then hit and hold reset button
How do you reset the change oil light for 2001 gmc Denali?
go to www.kofla.net
Why does the oil change lit stays on after an oil change in a Lincoln ls?
because you need to reset your oil light just go on your status and went you get to change oil just push the reset button and that's it
How do you reset the change oil light in a 2003 Oldsmobile alero?
Listed in your owner's manual. However, the reset pushbutton performs two functions. The first function is to find or select the change oil light. The second function is to reset the change oil light. So, when the manual says press the reset pushbutton, it means to press and release, press and release, press and release, ... and so on.... until the change oil light is selected. The change oil light is selected when it begins to flash on and off. Once the change oil light is selected by it flashing on and off, press and hold the reset pushbutton again in solidly to actually reset the light. Hold the reset pushbutton in until the chimes sound. This confirms the change oil light is reset and the light should go out.*Remember* before you even begin resetting using the reset button, the car must be in neutral or park or it will not work.AnswerIf you do not have an oil change reset button located on the drivers side inside the fuse panel. Turn ignition key to the on position (with engine off). Depress accelerator pedal 3 times. Oil change light should blink and you should here a beep, light will go out. Turn ignition key off.
Why does the Change oil light comes onafter i have aready changed the oil on my 2002 silverado?
The "change oil light" doesn't run off of the quality/quantity of the oil; it runs off of the odometer and the "memory" of the last time the "change oil light" was reset. In other words, if you changed the oil at 3,500 miles and reset the light at that time, the light will automatically come on at 7,000 miles as a reminder to change the oil. You can reset the light yourself in about 5 seconds. The "change oil light" doesn't run off of the quality/quantity of your oil. It runs off of a pre-determined distance from the last time the light was reset - presumably, the last time the oil was changed. For instance, if you change your oil at 3,500 miles, and the light is set to go off every 3,500 miles, then it will again go off at 7,000 miles, regardless of whether you re-changed the oil. Its just a reminder device. You can also reset the light yourself in about 5 seconds.
How do you reset oil change light on a 2005 Lincoln LS?
go to your Status button in the car and scroll to oil change option and hold the reset button down for 3 seconds. That simple!
How do you reset the Change Oil light on a 2002 Alero?
To reset the "CHANGE OIL" light, turn the ignition switch to the "RUN" position with the engine off. Fully depress and release the accelerator pedal three times in five seconds. The light will flash twice and go out.
Why would a change oil light come on your Chevy Trailblazer?
most likely needs and oil change or you didn't reset the oil change light after you got an oil change. The truck has a standard that automatically cuts on the oil light either when the oil is low or you have driving a certain distant and not had an oil change. Also if you have had an oil change recently and didn't reset the oil indicator than it doesn't recognize that you did get an oil change. To reset oil indicator all you do is turn the key to the run position (two click, do not start truck) then pump the gas pedal all the way to the floor three times the oil light should flash then go off.
How do you reset oil change warning light on a Toyota hilux 2007?
First you need to go and change the oil. Then you will be able to hold in the button on your screen to get it changed.
Why light change oil stays on on a 1991 Toyota Previa?
Because you need to reset the light after you change the oil. Changing the oil doesn´t turn off the light automatically , you need to reset it. there is a very small push button on the dash board that has a label "RESET OIL CHANGE", with the engine off, push and keep pushing while you turn the key to power up the accesories but don´t turn the engine on. the light will go off after a second or so. Because you need to reset the light after you change the oil. Changing the oil doesn´t turn off the light automatically , you need to reset it. there is a very small push button on the dash board that has a label "RESET OIL CHANGE", with the engine off, push and keep pushing while you turn the key to power up the accesories but don´t turn the engine on. the light will go off after a second or so.
How do you reset the change oil light on the dashboard of a 2004 alero after an oil change?
How to Reset the CHANGE OIL LightThe GM Oil Life System calculates when to changeyour engine oil and filter based on vehicle use. Anytimeyour oil is changed, reset the system so it cancalculate when the next oil change is required. If asituation occurs where you change your oil prior to aCHANGE OIL light being turned on, reset the system.After changing the engine oil, the system must be reset.To reset the CHANGE OIL light use the followingprocedure:Using the Accelerator Pedal1. Turn the ignition to ON, with the engine off.2. Wait until chimes go off,Fully press and release the accelerator pedal slowlythree times within five seconds.The reset is complete when you hear the chimesand the CHANGE OIL light goes out. However, if thelight stays on and no chime is heard, you willneed to repeat the reset procedure.3. Turn the key to OFF.If the CHANGE OIL light comes back on when you startyour vehicle, the engine oil life system has not reset.Repeat the procedure.
Reset oil light on 2002 Pontiac firebird?
Turn the ignition on in the car and hold down the trip reset button on the dash for about 10 seconds, the change oil light may blink a few times but then go out. All done!
