5 per wheel.
Yes.
six lug nuts per wheel on the 97 dakotas
torque specs. on lugnuts are usually around 90-100 ft.lbs.
Loosen, don't remove the wheel nuts, then jack up the vehicle and support safely. Now remove the wheel nuts and then the tire.
1/2 ton will have 6 lug nuts holding the wheels on and the 3/4 tons will have 8
If the wheel bearing was bad enough, the hub could possibly come off. The wheel bearing would have to have been failed for a long time.
At the nut house. Every major city has one.
12x1.5 with a 19mm hex head. 12x1.5 with a 19mm hex head.
There are a flat head nuts on the back side of the bummer, you will need to remove these nuts then pull the bolts out. the bumper (if it has not already done so) the bumper will fall off. If you also wish to remove the braces you can do so just as easily.
Hello, Once you take the tires off and remove the calipers, the rotors come right off just like a front wheel drive car. There is no castle nuts or bearings to deal with like the older trucks had. Good luck .............
Nuts come from the uk