The gas in a light bulb is Argon
Remove the turn signal light bulb connector. Take hold of the light bulb, push in and turn at the same time, to remove the light bulb. Reverse the process to install the new light bulb.
Electrical energy will turn on a light bulb. When the electrical current flows through the wires in the bulb, it creates heat and light, illuminating the bulb.
the bulb with two elements in it is the turn signal and brake light bulb
Halogen gas is in a Tungsten-Halogen Light Bulb.
The front turn signal light bulb can be accessed through the engine compartment. Take hold of the light bulb connector on the back of the turn signal. Push the connector in and turn at the same time. The light bulb will come out.
the Sparks on the copper makes the wire on the light bulb makes the 9v light bulb turn on.
Take hold of the turn signal light bald connector, push in and turn. The light bulb connector will come out with the light bulb. Remove the light bulb the same way you remove the connector. Reverse the process to install the new light bulb.
Light bulb is filled with inert gas or simply a vacuum.
It is dependant on whether the switches are in wired in a parallel or series configuration. If the switches are wires in parallel then both switches would have to be off to turn the light bulb off. Either switch could turn the light bulb on. If the switches are wired in series then both switches would have to be on to turn the light bulb on. Either switch could turn the light bulb off.
The bulb itself is a solid.
argon - inert gas