The solenoid pack on a Chrysler Sebring is on the bottom of the transmission. It is a bolt on unit and can be easily replaced.
5x100
5*114.3
The bolt pattern for what part?
It is right hand thread. Turn counter clockwise to loosen.
Adjustment is on the idler pulley with the tensioner bolt sitting right below the alternator. I also had to loosen the center bolt on the idler pulley before it would move.
The battery, on a 2010 Chrysler Limited Sebring, can be changed by first removing the battery cover. Remove the battery cables and the retaining bolt. The battery will left out. Reverse the process to install the new battery.
Not without major modifications. It will not simply bolt in and run.
The bolts can be purchased from your local Chrysler dealer.
No. Counter clockwise to loosen. It is very tight.
If it's the convertible, it's 5 x 100 ( same as 5 x 4.0)
It will bolt up, but I do not think you will have the power electrical connector.