Anything and everything, really. What you need to do first is check for fault codes stored in the computer. Chrysler conveniently made them easy to get at. See http://minimopar.knizefamily.net/fault/index.html for a description of how to get them, and what they mean.
theyre calipers and pads.. easy to swap em out.. theyre calipers and pads.. easy to swap em out..
yes, it should theyre mostly the same in those years Yes, it fits! Even the windshield from the coupé fits in the convertible and the one from the convertible fits to the coupé. As they are glued, they are not easy to bring out without crack, take care, U use a good tool for this. On the LeBarons newer than 1992, the Mirrors are not glued to the window anymore
The firing order of the MMC 3.0 is 1-2-3-4-5-6, easy to remember.
You would need to make a way to mount a carburetor on the factory intake manifold. It would not be easy.
Speed sensors are not user serviceable parts. The sensor needs to be replaced, and is usually either screwed in or bolted on making the replacement easy.
it is easy
6" x 9" measured as LxW but you need to be careful with the Depth of the speaker. The size is easy to find and purchase.
Hi, assuming your Lebaron has the 3.0 engine, the pcv valve is located right behind the valve cover that faces you looking at the engine. It's toward the right side. It's threaded into the block and there will be a black tube coming out of it. Very easy to remove and replace. rtalk7
if by throttle body sensor, you mean idle air control valve, it is below the tps on the 3.0 it has two star tip screws and one plug .. easy cheezie batman
remove the grills connect two 3 1/2's (the left will fit VERY TIGHT) but it replaced cardboard and wired into pre made slots for the speakers very easy in the end.
Convertible cars have been going out of style lately, so it may not be easy or cheap to find one, especially if you are looking for some of the original convertible cars, as parts for those are more than likely out of production.