It may or may not, auto transmissions are fitted with different tails depending on the car they are mounted, if both trannies are for the same car, they will be of the same length, if two th350's come from different cars they might bew differrent in length, the wisest thing to do is to measure the th200 and then verify the 350 tranny is of the same length, if not you can get a shorter tail.
The one who transmits more data bits in the same length of time, or the same number of data bits in less time, has the faster transmission rate.
Maybe, if you can find one with the same length, same bolt pattern, same shifter, same driveshaft splines.
no , look for a 200r4 trans which has overdrive and the same lenghth as the th350Wow...completely wrong answer. The 200-4R is the same length as the TH400. Not the TH350. The 700-R4 is the same length as the TH350. And yes....a B.O.P. TH400 will fit that 403 just fine. You'll have to locate a transmission cross member for the TH400 if it was originally a TH350.
If they are both the same motor maybe check length
it should as long as you have the same number splines in the old one as the new one and the spline housing is the same in diameter and length
No, maintenance and transmission is not the same thing.
No simply put 2 speed powerglide= 2 gears a 700r4 has at least three and some have overdrive.
Yes if they both use the same transmission. GM installs the same transmission in many different models. For instance the GMC & Chevrolet pickup have the exact same transmission if they are equipped with the same engine.
The answer to, "Segments that have the same length" Is Congruent Segments!
Sides with the same length are congruent.
No! Length squared will be the length times the length again. Length times height is going to find the area so it will not be the same.
yes, 4.3 and v8's usually use the same trans. make sure you get the right length tailshaft.