answersLogoWhite

0


Best Answer

It uses a spring loaded belt tensioner I believe. The tensioner is automatically set. IF there is not enough tension, then replace the tensioner. The belt may be stretched and need replacment however.

User Avatar

Wiki User

19y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: How to you tighten the alternator belt on a 1995 Plymouth Acclaim?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

How much oil goes into a 1995 Plymouth acclaim?

4.5 quarts


Location of fuel pump 1995 Plymouth acclaim?

It is in the fuel tank.


What windshields are compatible with a 1995 Chrysler lebaron?

dodge laser.. Plymouth acclaim


What other radiators will fit a 1995 Chrysler lebaron?

dodge laser Plymouth acclaim.. new yorker


Where does a Automotive Throttle Position Sensor go in a 1995 plymouth acclaim?

On the throttle body opposite of where the cables attach.


How do you you tighten an alternator in a 1995 cavalier?

Generally you don't tighten the alternator, you just make sure the belt tensioner is functioning properly. Sometimes the springs of the tensioner wears out or breaks.


How do you remove the ashtray cup-holder on 1995 Plymouth Acclaim?

just pull the ashtray all the way out and remove the screws on the sides.


1995 Plymouth acclaim transmission dipstick location?

Facing the engine, it's at the front right lower section. Very easily accesible


What is the spark plug gap for a 1995 Plymouth Acclaim 2.5 Liter?

0.035 inch gap using Champion RN12YC Spark Plugs


What is the shape of the Start Relay of 1995 Plymouth Acclaim Sedan Auto?

The Starter relay for Acclaims are located right on the starter, its what the wires that go to the starter hooks to.


Where is the water pump located on a 1995 Plymouth acclaim?

On the V6 it is inside the front of the engine, driven by the timing chain. On the four cylinder it is the lower front pulley on the motor.


How do you tighten an alternator belt on a 1995 Dodge Neon?

open the hood of the car go to the alternator. there should be a bolt facing the firewall on the alternator this adjusts it. make sure the other bolts are loose first. good luck!