THE EASIEST WAY IS TO TAKE OFF THE FRONT PASSENGER SIDE QUARTER PANEL. TAKES ABOUT 30 MIN. IT IS SITTTING RIGHT THERE WHEN U DO. IT SAYS ITS ABOUT THE SIZE OF A Asthma INHALER. OR U CAN TAKE THE BLACK WHEEL GUARD DOWN FROM AROUND THE TIRE. MAKES IT A LITTLE HARDER TO GET TO, BUT U DONT HAVE TO TAKE THE QUARTER PANEL OFF. WHEN U LOOK UNDER YOUR HOOD, ITS NEXT TO THE WIPER FLUID RESEVIOR. OF COURSE THAT METAL PLATE IS THERE, SO THATS WHY U HAVE TO GET TO IT FROM THE WHEEL AREA.
Wiki User
∙ 16y agoThe windshield wiper motor is under the front cowl. After removing the cowl the motor should be easily accessed for replacement.
* Remove the wiper arms * Remove the windshield wiper cowl cover * Disconnect the electrical connector from the wiper motor and remove the motor * Remove the wiper motor retaining bolts * Pry the linkage arm off the wiper motor pin with a large screwdriver
Remove the inside panel from your Hyundai rear door. The wiper motor mechanism will be visible. Remove the wiper motor linkage. Remove the wiper motor wiring harness. Remove the wiper motor retaining bolts. Reverse the process to install the new rear wiper motor.
22 inch (DS) and 20 inch (PS)
You may need to loosen the wiper motor mounting and re-adjust the position in that manner. Make certain that the bolts are tightened (torqued to spec) but not over-tightened.
how do you replace rear wiper motor on a 1997 ford explorer
How to replace wiper motor on a 1998 montero sport mitsubishi
Remove the wiring harness from the wiper motor. Remove the windshield wiper arm from the wiper motor. Remove the wiper motor retaining screws. Reverse the process to install the new wiper motor.
Most if not all Hyundai Sonatas have hook end wiper arms which are easy to change, replace, remove and install. See sources and related links below for installation videos. Also, purchase the replacement blades first and there will be additional instructions/illustrations on the replacement packages. Locate and press the tab or button where the wiper blade is inserted into the hook of the wiper arm and pull wiper blade out of hook. You may have to rotate and flex the blade to make enough clearance for the hook to pass through.
# Remove the wiper arms # Remove the windshield wiper cowl cover # Disconnect the electrical connector from the wiper motor and remove the motor # Remove the wiper motor retaining bolts # Pry the linkage arm off the wiper motor pin with large screwdriver
how do you replace a wiper motor in a 2000 jetta?
where is the wiper motor on a 1996 Nissan Maxima GXE