0
Disconnect negative cable at battery. Remove the inside door trim panel, remove film watershield, remove the door window glass assembly by lowering the window all the way, remove inside door handle and rods, unplug electrical mirror and regulator wires, remove the glass stabilizer bolt, then the 2 window glass retainer bolts, lift out the window glass, then remove the 4 regulator assembly bolts and wiggle the regulator out thru the opening. Reassemble in reverse order. Buy a Haynes Repair Manual for about $15 and save yourself some anguish! YFC
Add your answer:
Earn +20 pts
How do you replace window regulator 2000 ford escort ZX2?
HOW DO I REPLACE WINDOW REGULATOR MOTOR ON PASSENGER SIDE WINDOW
How do you replace a window motor and regulator on a Ford E150?
how do I replace the passenger side window regulator on an E250, 2006. the window will not release to push to top of window frame only half way?
Can you tell me what a window regulator is?
Window regulator controls the up and down motions of your car window. Both electric and manual windows have a window regulator. Not the easiest part to replace, but once you dissembled the door panel it should be fairly simple to replace.
How do I stop a window from sliding down on Intrigue?
replace the window regulator.
How do you replace a rear window regulator on 2005 CTS Cadillac?
To replace a rear window regulator on 2005 CTS Cadillac remove the side protection panel of the car door then adjust the regulator.
How do you replace window regulator or window clips on rear window of 2000 grand am?
It is easy to replace the window regulator or window clips on the rear window of a 2000 Grand Am. The clips simply snap right onto the rails inside that door that connect to the window.
Should you replace both window motor and regulator?
No
How to Replace window motor in a 1999 suburban?
How to remove the window motor from the regulator
How do you fix a jeep window that has fallen down?
Replace defective window regulator
How do you replace achieva power window motor?
Remove the window regulator assembly from the door.Remove the motor from the regulator by drilling out the attaching rivets with a 3/16 in. drill bit.Connect the window motor to the regulator with 3/16 in. rivets.Install the window regulator assembly.
Can you raise power window manually?
You have to disconnect the glass from the regulator or clip the regulator cables.See this post for instructionshttp://www.ricksfreeautorepairadvice.com/repair-topics/window-power-repair/replace-a-power-window-regulator
How do you replace window regulator in 2003 Buick LeSabre front driver side?
The way that replace a window regulator in a 2003 Buick LeSabre front drive side is by removing the door panel. Next, disconnect the electrical connector on the regulator and replace.
