Remove Wheels Install 2 lug nuts to hold rotor in place Loosen caliper mounting bolts Remove 1 caliper mounting bolt to allow caliper to swing off rotor Remove outer brake pad Use "C" clamp to and inner pad to fully retract piston into caliper body Replace both inner and outer pads Slide caliper onto rotor and resecure PUMP BRAKE PEDAL TO SET PADS AGAINST ROTOR PRIOR TO MOVING VEHICLE
Visit the forums at genvibe.com. There is a nice walk through with brakes to service your front brakes.
Yes , a 1995 Pontiac Sunfire is a front wheel drive vehicle
you have to take all brakes and rotor off the hub. then you must spin the hub so the access hole is in front of the bolts,and take all 3 bolts off. then you must pull the hub off of the spline.
I have a 99 grand am and I am tring to replace the brakes on the front of my car but when I go to put the brakes back on the caliper wont line up wheats wrong with this? How do I fix this?
You need a 3/8" allan key or hex socket - not a torx
* Remove the front bumper fascia * Unplug the horn electrical connector and remove the bracket bolt
yes
4x6
take the wheel well out first then reach in and turn bulb socket
Yes, as are all the Sunfires.
Try Front Left.
Yes.