0
all i know is that I've got a friend with the same problem and he's is at breaking point with this.he has his driver side fender off, front bumper off, you name it. i almost think you can route it through the fire wall behind your steering wheel,run it along with washer hoses, somewhere under the headlight, now under the frame towards the latch. you should take your bumper cover off for good vision. with some zip ties and tucking the cable under stuff i think this should be a breeze for you.
Disconnect the cable from both ends, tie a strong string to the hood end, pull from the handle end. Tie the new cable to the end under dash and pull from the hood end of the string. This takes some strong pulling but once it starts going it is smooth sailing from there.
Add your answer:
Earn +20 pts
How do you replace hood release cable on 69 Corvette-hood is closed?
== ==
Hood release tab broken from inside - how to open hood and replace the hood release lever?
If it is just the plastic handle broken, behind that is the cable that opens the hood. Just grab the cable with a pair of pliers and pull. You can probably just replace the inside handle and not have to run a new cable.
How do you adjust the hood release cable on a 1996 GMC Sierra?
you have to replace it
How do you replace the hood release cable on a 1999 Honda Civic?
The hood release cable snakes into the cabin of the car through the firewall. To replace the cable remove the old wire. Zip tie the new cable to the old one and pull it out. This will easily snake the new cable into place. Install the new cable on the release and lever.
How do you replace the hood release cable on a 93 Honda accord?
www.cb7tuner.com Will answer all your problems
How do you replace a 1981 Corvette hood release cable?
You need to make sure that it is in deed the hood cable release that is the problem 1st. Next contact your nearest Dealership. They will be able to replace the cables for next to nothing Cost (At VERY Fair Price)
How do i open the hood on a 2000 beetle if the hood release lever is broken inside the car?
To open the hood on the 2000 Beetle if the hood release lever is broken inside the car, you can remove the glove compartment of the vehicle and find the release cable inside the dashboard. Pull the cable to open the hood. You will then need to replace the hood release lever.?æ
How do you fix a hood release bracket that holds the cable at the latch?
Replace it with a new or used one.
What is the name of the cable yhat opens the hood?
The hood release cable.
Broken hood release cable town and country?
Hood release cable has connector nuts on both ends of the cable. Loosen the connector nuts. Remove the cable retainers. The cable will come off and can be replaced with a new hood release cable.
How does acura 3.0 cl hood release work?
The hood release handle is connected to a cable. The cable runs to the front of the hood and connects to a catch. When the cable is pulled the catch releases the hood.
How do if fix the hood release on your 95 Acura Integra?
The hood release cable is held in place by a retaining nut on each end of the cable. Remove the retaining nuts and the cable placement retainers. Reverse the process to install the new hood release cable.
