0
Add your answer:
Earn +20 pts
How do you remove the harmonic balancer in a Nissan Maxima?
To remove the harmonic balancer from a Nissan Maxima, first you need to removed the center bolt. After that, you can use a puller to remove the harmonic balancer. Before you do this, make sure you disconnect the battery and remove the drive belts.
How do you replace harmonic balancer on 1993 f 350 with 351 motor?
first remove serpintine? fan belt then remove large bolt in middle of harmonic balance. this bolt usually has left hand thread next with a harmonic pulley ,puller, remove harmonic balancer.when removing this, there is a key in the balancer and shaft if a new key did not come with new balancer,make sure not to loose the old one install new balancer with key.use the bolt to pull balancer up tight where it needs to be and use proper torque on bolt
How do you remove 327 harmonic balancer?
With a balancer puller tool. With a balancer puller tool.
How to remove crank pulley?
On most newer cars, the crank pulley is one piece with the harmonic balancer.... Remove it with a harmonic balancer puller.
Will a 350 harmonic balancer work on a 4.3L V6 and if not why?
No, a 350 harmonic balancer will not work on a 4.3L V6 because they have different specifications such as size, weight, and balance. Using the wrong harmonic balancer can cause vibrations, premature wear on engine components, and potential engine damage. It is important to use the correct harmonic balancer for your specific engine.
Chevrolet harmonic balancer tool?
The harmonic balancer tool is made especially to remove the balancer. Some stores will loan you the tool with a deposit.
How do you remove harmonic balancer on 2000 cougar?
use a harmonic puller
How do you remove a harmonic balancer on a Chevy Malibu with 3.1?
Go to Autozone and tell them u need a harmonic balancer puller
How do you remove the harmonic balancer on a 1998 saturn sl2?
To remove the harmonic balancer on a 1998 Saturn SL2, you will need to use a harmonic balancer puller tool. First, remove any surrounding components that may impede access. Then, attach the puller to the balancer and use a wrench to slowly tighten the puller until the balancer comes off.
Is the harmonic balancer the same for an 85 and 86 Chevy 350?
yes.
Will a Chevy 305 harmonic balancer work on a 350 motor?
yes
What size is a 350 Chevrolet harmonic balancer?
It should be 8 inch
