The water pump is behind the smooth pulley up top closest to the front of the car.
1) Warm engine fully.
2) Stop engine.
3) Drain coolant.
4) Slightly loosen water pump pulley bolts. If necessary, us a long open-end wrench on one bolt (2 mm larger than correct size) to hold the pulley from turning while using a correctly fitting 6-point socket to loosen another bolt.
5) Loosen the belt tensioner and remove the belt.
6) Unbolt and remove the water pump.
7) Use scotch-brite to remove any old gasket material.
8) Position new pump and gasket in place and install the (five?) bolts.
9) Position pulley in place and snug up four bolts.
10) Reinstall belt and tighten pulley bolts fully.
11) Fill cooling system. You should use a vacuum type fill tool if available, otherwise be sure to remember to open the bleeders.
where can you find a diagram of 1994 pontiac grand am motor?
How do you do a front-end alignment on a 1994 pontiac grand prix?
No.
problem with power steering 1994 Pontiac grand am 2.3L
what is the correct alignment marks on a 1995 Pontiac grand prix
Fuse box for 1995 Pontiac grand am - door lock
no their not front wheel drive you must be thinking of a Pontiac grand am or a grand prix
134a
if its a chain^
1994 PONTIAC GRAND PRIX SE COUPE CURB WEIGHT: 3280 LBS.
with an oil drain pan and a socket...make sure you have more oil to put back in...
Cut the wires on the old fixture and splice wires from new receptacle