Wiki User
∙ 16y ago2 hours
Wiki User
∙ 16y agofollow the top radiator hose to the engine. that is where your thermostat is. you will have to drain the radiator, remove the engine side of the hose and remove the thermostat housing to access it. remove thermostat clean mating surface of housing and engine, install thermostat, install housing, secure radiator hose, fill with coolant. start engine and check for leaks.
Follow the upper radiator hose from the radiator to the engine. Where it meets the engine there is the thermostat in the housing. Make sure you install the spring TOWARD the engine when replacing it. GoodluckJOe
i think you have to open the cap on top of the engine block and drop the thermstat in there.
do you have a diagram for pontiac grand am 2005 thermostat
thermostat? engine size?
1955
Assuming you have the 2.2, 4 cylinder engine, the thermostat is located on the side of the engine that faces the firewall.
Assuming you have the 2.2, 4 cylinder engine, the thermostat is located on the side of the engine that faces the firewall.
At the point where the upper radiator hose clamps to the engine is the thermostat housing. Inside is the thermostat.
no,not really
The thermostat is located in the housing where the top radiator hose connects to the engine. You will have to disconnect the hose and unbolt the housing to get to the thermostat.
It is not hard if you have the proper tools. Drain the radiator and remove the upper hose at the engine. Remove the thermostat housing and install the thermostat. Clean the surfaces and install the new thermostat.