0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
How do you change glow plugs on a VWgolf 1996 diesel?
Changing the glow plugs on a 1996 VW Golf diesel can be done with some basic tools and mechanical knowledge. Here’s a step-by-step guide to help you out: Tools You'll Need: 10mm or 12mm socket and ratchet Deep socket (8mm for most glow plugs) Extension bar for the ratchet (optional, depending on the location of the glow plugs) Torque wrench Needle-nose pliers Anti-seize compound (optional but recommended) Gloves (optional) Step-by-Step Guide: Read More....tinyurl. com/bdcp4um8
What volts per bar in db is equivalent to volts per micro pascal in db?
I think 1 volt/bar when expressed in db you need to add 200 db to get reading in volts per micro pascal.
How do you change the glow plugs on a Mitsubishi 2.8 tdi?
Fairly straightforward to change the tdi glow plugs. They are located on the near side of the engine and the first thing to do is give them a good airblast to remove any debris and stop it falling into the glow plug hole after you've remove the plugs. Next loosen the top nut on each glow plug and slide away the connecting bar. Remove the plugs the same as you would spark plugs (ie with an appropriate size socket) and replace them with new plugs. Make sure top nuts have enough space to slide the connecting bar back into place - tighten holding nuts. Job done.
Can you plug a power bar into a power bar?
Yes.
How many amps can handle in 12 volts a 600 volts 15 amps rated terminal bar?
The terminal strip's rating is 15 amps at 600 volts. It does not matter what the voltage is up to 600 volts, the maximum amperage allowed on the strip is 15 amps. It could be 15 amps at 12 volts or 15 amps at 600 volts or any voltage in between.
How do you wire a wire to a wire?
If you are connecting 120 volts, you connect the black wire to the breaker, white wire to the neutral bar, and ground wire to the ground bar. If you are connecting 240 volts connect the black & white wires to the breaker, & ground wire to the ground bar.
Is it always safe to plug as many devices into a power bar as there are outlets?
no because it may short and cause a fire
How do you fix LCD TV scrolling hum bar?
Bad ground in your home. 1 bar is 60volts 2 bars is 120to volts.
How does the kill switch work on a 3.5 horsepower Craftsman edger?
If it's the metal bar near the spark plug that you push towards the plug to kill it, all it does is ground out the plug, making it not spark. That bar is connected to the frame of the mower ie grounded which in turn grounds out the plug and wire
Where are the glow plugs located on an 06 vauxhall vectra?
at the back of the engine, under the bar near the top of engine
Can you plug a power-bar on a 220V to 110V converter?
The power-bar must be plugged into the correct voltage it was designed for.
How do you change glow plugs on endura De engine?
Undo the bolts on the top of the glow plugs that's securing the rail in place. The with that removed take the glow plugs out deep docket and a longish bar is a good idea as then you get out the way of all the pipes and wires ect
