Remove the tire and wheel from your 1994 Mercury Cougar. Remove the brake spring and brake caliper. The brake shoes will come off.
A car what has front disc and rear drum brakes have front brake pads and rear brake shoes.
1995 Mercury Cougar does not have front wheel brake shoes. It has disc brakes and therefore disc brake pads. Copy & paste this link into your browser. http://www.advanceautoparts.com/english/youcan/html/ccr/ccr20021101db.html
To be candid, I really don't know. However, I recently changed the (8") rear brake shoes on my 2000 Mystique. The brakes are held in adjustment by a grooved cam (not a star-wheel). One of the most difficult parts was removing the drum from the spindle. I used the required 32mm socket, then applied "gentle persuasion" to pass the drum-ridge over the brake shoes. I'm sure there is a preferred method, however, I was at the point of desperation motivated by the ever popular impending time constraint. I am assuming your brakes are either out of adjustment, indicating either a brake-spring failure or the cam grooves have filled with brake-dust; or you have decided to change the shoes, and can't get the drums off with the shoes in the current adjustment. SUGGESTION: Take photos of the spring orientations prior to disassembly of the shoes. Good luck.
Disc brakes ( with small brake shoes in the back of the rotors for your parking / emergency brake )
i bought 9
go to auto zone and give make and model
The minimum thickness of brake shoes on a 2002 Ford Focus LX is 0.32 inches. Whey they fall below this thickness, they lose much of their stopping power.
Remove the tire and wheel from your Mitsubishi. Remove the brake spring and the brake caliper. The brake shoes will come off. Reverse the process to install your new brake shoes.
The simplest way to fit rear brake shoes to your 1996 vehicle is to purchase the appropriate brake shoes. The appropriate brake shoes will automatically fit perfectly.
do I need brake pads or brake shoes for 1998 Chevy tracker
Hello. I have a 1999 Mercury Sable. I took it for inspection and was rejected. The mechanic said I needed both front brake pads and both rear brake shoes also a master cylinder. Could you give me an estimate on the labor for all of this. I already bought the parts. Thanks