1 AMP
100 amps
To calculate the amperage drawn by the heater, you can use the formula: Amperage (A) = Power (W) / (Voltage (V) * Square root of 3). In this case, the amperage drawn will be approximately 5.8 Amps.
How many Amps is the fridge pulling? Multiply the Amps by the 120V circuit you're plugging into and you'll get your Watts.
2,4789
23
Depends on what refrigerator you are interested in. They all have a label somewhere, usually in the refrigerator compartment that lists the current. My refrigerator has a rating of 11.6 Amps. This is not a consistent current, but would be when the compressor is running.
amps like.. amplifiers? it depends on how many speakers you have. or amps like.. current draw? again. depends on your power needs, your power amps... ect
1100 watts or about ten amps then another 3 to 4 amps for turn table light and fan
Amps for an oven are governed by the total wattage of the oven and what the voltage supply to the oven is.
It is drawing .06 amps.
It would be at least 250 amps, maybe 300 amps.
A block heater typically draws around 6 to 10 amps of current. It may vary depending on the wattage of the heater and the voltage of the electrical system it is connected to.