how to install a fuel pump on a 2000 jeep Cherokee 6 cylc
you will need to drop the fuel tank and remove and install from the top of the fuel tank
Engine torque and horse power will be the same, but the torque available to the ground will be reduced due to the fact that it is harder to turn larger tires.
Most all Cherokee fuel filters are in front of the fuel tank on the drivers side under the vehicle.
Release the fuel pressure . Remove the gas tank . On the top there is a lock ring, loosen it and install the new module assembly.
on the highway when you are not towing anything and you want to save some fuel, its another gear which lowers the rpm's and the torque, thus saving fuel.
A 2000 Jeep does not have a torque converter drain plug.
The fuel filter is in the gas tank. You have to drop the tank and replace the paper filter
The fuel pump is in the fuel tank and the fuel tank will have to be removed to access it. If you do not have the skill or equipment to do this properly, I suggest taking it to a shop.
The fuel pump on a 1996 Jeep is in the fuel tank.
first you need to lower your fuel tank the access in on the top of tank remove retainer pull out you sender and replace
Jeep Cherokee's are unibody. You cannot install a body lift.