locate the "tensioner" pulley, on the schematic that is under your hood, on top of the radiator. Then place a socket on the bolt head in the middle of that pulley, and with a breaker bar, pull the entire pulley towards the front of the van, releasing the tension, and letting the belt slip off easily. Repeat this procedure once you have the new belt routed around most of the pulleys properly and slip it over the tensioner pulley last. Double check belt alignment on all pulleys, make sure it is well tensioned, then start your van and let it idle about 5 to 10 seconds, shut it off, and recheck the belt alignment and tension. If all looks well, then close the hood and call it a job well done.
what is the diagram of a serpentine belt for a dodge shadow 1994
serpentine belt routing diagram for 1994 dodge spirit
You can do that by replacing the tensioner
Here it is:
by taking it to a mechanic
no!
The belt tensioner is self-adjusting.
Go to www.autozone.com and look under specifications, belt routing. On a 1989 Dodge Grand Caravan, the diagram is on the side of the engine where the S-belt is located.
There should be a diagram under the hood for that year.
Fit a new belt tensioner
No. The timing belt or chain connects to crankshaft and camshafts. The serpentine belt connects the crankshaft with the alternator, ac compressor, power steering, etc.
It is the item in the serpentine belt that is the lowest and furthest forward.