answersLogoWhite

0


Best Answer

Use a small flat head screw driver and insert between door panel and door on the bottom of door in the middle, pry outward. There are small plastic inserts that just push into holes in the metal door. These are along both sides and bottom and there may be one towards the top in the middle. When you get the bottom and both sides popped out then pull upward. If the plastic inserts come out of the door panel and stay in the holes in the door, use needle nose pliars to pull out and they will slide back into groves in the back of door panel for reinstallation. I don't know about the manual window crank handle mine is electric and I don't have to remove the door handle or lock slide in order to remove the door panel. Good luck... there is a "C" clip between the door panel and window crank... it holds the crank onto the spindel, you can use a small flathead screw driver to pop it out and the crank will pull off the spindel. (you can put the clip back on using a screw driver as well but there is a tool specifically made for that which makes taking it off and putting it back on a lot easier... but is not required)

User Avatar

Wiki User

18y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: How does one remove the door panel on a 1998 Dodge Ram 1500 regular cab no power windows or door locks?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

How do you disable the automatic door locks on a dodge caravan?

Remove the relay or fuse for the door locks.


How do you disable the automatic door locks on a 99 Accord?

Remove the power locks and windows fuse you will loose power for your windows also


You attempt to install a new hardware device but Windows 98 locks up during the boot You remove the device and try to reboot but Windows 98 still locks up Which tools do you use to solve the problem?

Device Manager


How do you lock Windows XP?

Key combination [Windows+L] locks Windows XP.


How do you lock XP?

Key combination [Windows+L] locks Windows XP.


2003 Dodge Dakota power windows and locks have stopped working what is the problem?

First check for a blown fuse. Check to see if there is power at the motor. If there is power at the motor then the motor itself is bad.


How do you surpass a locked door on a mobile home?

Same way you would in a regular house ! - Remove the lock or hinges if possible, if not, cut the lock off . Locks are cheap.


How do you remove a door panel on a 2001 dodge ram 1500 with no power windows or locks?

# Disconnect negative battery cable # Remove all door trim panel retaining screws and door pull/armrest assemblies if equipped with power mirrors remove the switch knob by pulling it straight back and remove the switch retaining nut # Remove the window crank insert a putty knife between the trim panel and the door and disengage the retaining clips.Work around the outer edge until the panel is free


Is it possible to install power windows and door locks on a 1999 ford ranger that has manual windows and locks. looking to upgrade?

yes aftermarket kits are available the electrical components are already in the door


What fuse controls power windows and locks?

The fourth fuse in the interior fuse panel controls the power windows and locks on 2000-2001 Grand Prix. 25 amp silver fuse.


If the master switch is broken will none of the windows work on a 1993 Nissan Pathfinder The power windows and locks both won't work. Help?

if the master switch is broken none of your windows or locks will work you can find one at a local auto wreckers


How do you remove a Chevy Blazer door panel?

When removing the door panel, you need to remove all of the screws first. Then pull the door panel off. There should be screws around the edges or the door panel, and 1-2 screw on the door handle(on the inside). Then pop the door panel off, if the blazer has electric windows and locks you have to disconect them first, if it doesnt have power locks and windows, you have to take the window crank off,there should be a screw in the center of that. Unscrew the door lock and pull up. If it doesnt have them locks then you have to disconect it from inside the door panel