on the side of the shifter facing the driver there is a rectangular button. if it's pushed in then OD is on. If it's sticking out, OD is off.
All that info can be found in the owners manual.
Push the button below them.
USE OVERDRIVE WHEN NOT TOWING , TURN IT OFF IF YOU ARE TOWING OR PULLING A LARGE LOAD
The 1999 Dodge Avenger signal flasher relay switch is located beneath the drivers side dashboard. The signal flasher relay switch will be between the gas pedal and the brake pedal.
The Serpentine Belt needs to be tightend with the tensioner pulley (Idler Pulley)
Very carefully. The hardest part is pulling the light out to get to the bulbs. If I can do it anyone can do it. floppysgirl
Behind A/C and heater control panel, to right hand side of steering column.
The remote amp turn on a 2012 Dodge Ram 1500 is the wire that taps on the harness to supply the 12v.
It may depend on the model year, but I believe that it's usually by means of a button on the shifter.
You probably have a burned light bulb, either in the front or rear.
That is the overdrive off button, it is used to turn off OD when not wanted.