0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
How do you set the idle on a 1992 Chevy Corvette?
Idle is set by the computer.
How to set timing in a 1988 Corvette?
Figure out your engine type, then ask how to set timing on a 1988 corvette ***** engine. That should help you a great deal.
How do you set the clock on a 1989 Corvette?
To set the clock on a 1989 Corvette the radio must be turned off. After turning the radio off hit the set button and then hit scan. The time can be set using the arrow buttons.
Tire psi for a 1998 Chevy Lumina?
Check the drivers door tag, it should be there. If not look in the owners manual. Other than that set them to 32 psi when cold.
What is the standard tire pressure for a 1998 Oldsmobile Intrigue?
Should be 30 or 32 psi COLD (before it's been driven) or I usually set them at 35 when they're warmed up. DO NOT set them to the max psi on the sidewall.
Will 1969 Corvette sidepipes fit on a 1975 Corvette?
Yes. But call the folks at Hooker and get a set of stainless steel headers and sidepipes. They rule.
What is a tire cord?
It is a part of the fabric inside the tread that is set in rubber when the tire is molded.
What is the biggest tire you can put on a stock 1998 gmc sierra K1500?
ive seen a set of 285/75R16s on a similar year but it looked awful close to rubbing the fender and bumper
How do you set clock in 1986 Corvette?
1. Turn the radio to off 2. Press "set" 3. Use "scan" to set hours and "seek" to set minutes
How do you reset the tire pressure monitoring system on a buick rendezvous?
# Set all tire pressures to the recommended kPa/psi. # Turn ON the ignition, with the engine OFF. # Press the MODE button until LOW TIRE PRESSURE HOLD SET TO RESET is displayed. # Press and hold the SET button until a chime sounds and TIRE PRESSURE RESET is displayed and a chime sounds 3 times. # release the SET button and TIRE PRESSURE NORMAL is displayed.
How do you set the timing on a 1998 Cadillac Deville?
how do i set the timing on a 1998 cadillac deville 4.6
How do you set timing on a 1988 Corvette Non-ZR-1 and is the tan black stripe wire that is supposed to be disconnected from the ECM part of the 4 wire plug that connects to the HEI distributor?
== == need to set timing on my 1986 corvette after replace hei
