There are three ways to tackle this problem. First address the problems that are causing the dummy lights to come on, buy doing the necessary repairs. Secondly unhook the battery, this should clear the computer, reconnect the battery cables and drive the car as normal eventually (1 or 2 days) the computer should reset itself, if any warning lights reactivate you still have a problem somewhere! Thirdly most Honest auto shops wont charge You any $$ to throw your car on the diagnostics to get a more thorough explanation of the problem. Good Luck & Good Motoring!
How do I Reset dashboard warning lights on 90 Lexus ES250
If the warning lights go off in a Chevy Tahoe, it indicates a problem. In order to reset these lights the problem must be solved.
Depends on what warning light you are asking about.
on most vehicles you can reset warning lights by simply unconnected a battery cable
The check engine and other dash warning lights can be reset by disconnecting the vehicles battery for more then 5 minutes. If warning light continues after reconnecting battery then there is still a problem.
When warning lights go off on a car, it means that there is a problem to fix. To reset the lights, one must fix the problem, or they can use a scanner to reset it.
Most cars are equipped to reset oil change warning lights. If the Fiat Doblo does not have instructions in its manual, then you will have to have the dealer or a mechanic do it for you.
fix the problem causing them and than have to take it to shop so they can reset it with their scanning tool,
You can reset the brake warning lights, on your VW Jetta, by backing up 20 feet and using the brakes. The automobile will sense the new pads and the warning light will go off.
There is no reset procedure for thesr lights , if there is a malfunction they will illumunate www.lextechautomotivellc.com
To reset the overhead warning light, hold the SELECT and UNITS buttons on the trip computer for 5 seconds. The service interval light will be illuminated and then extinguish after approximately 4 seconds.
DISCONNECT THE NEGATIVE BATTERY LEAD AND WAIT 1-3 MINUTES THIS WILL RESET THE COMPUTER THAT REGULATES THE IDIOT LIGHTS