If you mean the Saturn L200, the instructions are pretty clear in the owner's manual (look up change oil warning). I don't have the manual with me, so I am going from memory, but I know you take the cover off the fuze box (behind the battery), there is a red reset button. With the key on, but engine off, hold the button down for several seconds. I think the light flashes, then turn the key off and back on. the light should go off. Don't forget to replace the cover. Hope this helps.
try to reset oil light on 528i bmw year 2000
There is none.
Check the operators manual since different manufacturers have unique ways of resetting the indicator light. For several models, Saturn used a reset button that was inside the fuse panel adjacent to the battery. If you can locate a reset button in that panel, turn the key to the on position but with the engine off, then press and hold the oil reset button for 5 or more seconds until you hear the door chime from inside the vehicle.
oil servis reset without using a computer http://www.kofla.net/chevrolet.htm
Most OBD2 code scanners give you the option of clearing the code and resetting the MIL.However, if the problem still exists the light will come back on.Repair the problem and the computer should reset the light.
how to reset abs warning light on 2000 gmc Yukon
If the change oil light comes on, then a person needs to change their oil. If a person changes their oil the light should turn off.
you press the status button. when the oil life indication comes up, hit reset.
key on engine off press gas pedal to the floor 3 times wait it will flash and its reset
I did the oil change on my 2000 ml 320 but the dash still displaying -10 D and i have tried to do the reset following the procedurs but the two little wrenches are there and
You can reset the ABS light in a 2000 Mazda 626 by unplugging the battery cables. You can also reset it by connecting a diagnostic tool to your car.
How does one reset service engine light on 2000 Nissan Quest Thanks Bill