0
Add your answer:
Earn +20 pts
How do you reset the low washer fluid light on 2004 Alero?
You don't. Just and fluid and it will go off.
How do you reset the oil change light on a 2004 Buick Century?
Disconet the battery for 15 minutes this will reset your oil change light
How do you turn off 'change oil' light after the oil has been changed in an 03 Alero?
For 2004 its turn on accesories NOT ENGINE and push in gas pedal to floor three times within about five to seven seconds and it should reset the light..
How do you reset the check engine light after an oil change on a 2004 Pontiac Vibe?
The check engine light has nothing to do with an oil change. The check engine light is reset with a scan tool after repairing the failure that caused it.
How do you reset the oil change light on a 2004 ATV Honda rincon trx650fa?
To reset the oil change light, hold down the odometer and clock buttons for a few seconds. (with the ignition turned on).
How do you reset passlock on 2004 alero?
Turn the key to "on" and let it sit for approx 10 minutes until the 'security' light stops flashing. Turn to off and start as normal.
How do you reset service engine soon light in a pontiac 2004 grand am se?
How to reset service light on a 2004 grand am
How do you reset the change oil light on the dashboard of a 2004 infinity qx56 after an oil change?
Start the car push the trip button until you get to engine oil and select reset and you are done.
How do you reset change oil light on 2004 Alero Don't see a button?
Many of the GM vehicles of that vintage had an oil change reset button inside the fuse panel that is immediately adjacent to or behind the battery. If you can find that button, turn the key ON but engine not running, press and hold the button for about 10 seconds. Someone watching the light should see it flash a couple times. Turn off the key, then start the engine to see if the light goes off after the startup "test" sequence.
How do you reset the change oil light on a 2004 grand am?
To reset the light, turn your ignition to on, then press the gas pedal 3 times, then start the car. To reset the light, turn your ignition to on, then press the gas pedal 4 times then you will hear a beep, then start the car.
How do you reset the change oil light on the dashboard of a 2004 alero after an oil change?
How to Reset the CHANGE OIL LightThe GM Oil Life System calculates when to changeyour engine oil and filter based on vehicle use. Anytimeyour oil is changed, reset the system so it cancalculate when the next oil change is required. If asituation occurs where you change your oil prior to aCHANGE OIL light being turned on, reset the system.After changing the engine oil, the system must be reset.To reset the CHANGE OIL light use the followingprocedure:Using the Accelerator Pedal1. Turn the ignition to ON, with the engine off.2. Wait until chimes go off,Fully press and release the accelerator pedal slowlythree times within five seconds.The reset is complete when you hear the chimesand the CHANGE OIL light goes out. However, if thelight stays on and no chime is heard, you willneed to repeat the reset procedure.3. Turn the key to OFF.If the CHANGE OIL light comes back on when you startyour vehicle, the engine oil life system has not reset.Repeat the procedure.
How do you reset pit maintenance light for oil change in the navigation display on 2004 infiniti g35?
i tryed on my car it does not work pit light still on
