how do you reset the check engine light on a 2005 Toyota tundra
1.press mode button until oil life or change oil or change oil now is displayed2. Press and hold mode button for 5 seconds until reset for new oil is displayed3. Hold reset for 2 seconds
Hit the stautus button on the dash. While it is displaying oil life on the trip computer display hold down reset until it resets.
1. Press the STATUS control to access the System Check function. Press RESET to reset the oil %. 2. Press and hold the RESET control to set to 100%. 3. After the successful reset, the message center will display OIL LIFE SET TO 100%. This is how I do it on my 2005 Lincoln LS.
disconnect the battery, it's located in the spare tire compartment.
Press the STATUS button on the dash, when it gets to AC filter press and hold the reset button.
How do i reset a service engine light on a 2005 gmc c6500 cat engine
how do you reset the oil light on a 2006 sts to 100%?
When you take your car in for an oil change, have the technicians there do the reset for you. (they should automatically do that for you, but you may have to ask them....to make sure they do it) Valvoline does it as part of their service.
Turn the key to the 'on' position (do not start the truck).Wait for the change oil light to come on.Tap the gas pedal 5 times.Move key to off position, move key back to on position. The change oil light should be reset.
Turn the key to on, do not start, push the gas pedal to the floor three times, the light should flash on the dash indicating the reset. Turn the key off. You should be reset.
When you see the Change Oil light on, push and hold the button just like you would to reset the trip counter