Why? Just reset it.
To reset the fashing dash blue security light............disconnect the hot lead on the battery and after about 3 minutes, reconnect it. Light should be off now.
Worn brake pads can cause the brake light to blink on the dash in a 1993 GMC Sierra 1500. This can also be caused by a faulty light.
The light can not be reset without fixing the cause of the code that turned the light on.
Press the reset button
how do you change ash tray light bulb in a 1998 GMC Sierra 1500
No reset switch on a Dodge Ram.
HeadlineTry putting your truck in neutral with the engine off. You probably need to turn the key to the on position (dashboard lights on) but don't turn the engine on. Pump the gas pedal 3 times. That should reset the warning light.
See sources and related links below for a full list of automotive light bulb lamp part numbers for the 1998 GMC Sierra 1500.
YOU DO NOT NEED TO DISCONNECT YOUR BATTERY!! Turn the key to the on position. Do not crank the motor. After the key is in the on position, quickly push your accelerator pedal down 3 times within 5 seconds. Next start the vehicle. If you have successfully reset the maintenance reminder, it will not appear again until the next service interval.
unhook battery, step on brake pedal, wait 30 mins.
To replace the brake light switch on a 1995 GMC Sierra 1500, the steering wheel will have to be dismantled until the brake light switch is reached. The switch is changed by unplugging it and plugging in a new one. There are screws holding the switch in place.