I too have a Saturn ls2 2000. The car can be programed to the remote by turnning the key on and off a certain number of times (and some say holding down the un-lock button while doing so) will put the car's remote receiver in program mode. Then up to 4 remotes may be use by pushing the lock or unlock buttons on each remote. I'm sorry the directions are not exact but that's why I'm here, looking for the exact instructions.
keyless entry must be programmed using a tech 2 scan tool by the dealer If you look in the owners manual there are a few things you can do but if you are replacing both fob's you need a scan tool
You need to have the dealer do this one as it takes a special computer.
Yes , keyless remote entry
YOU CAN FINE ALMOST ANY KEYLESS ENTRY ON EBAY AND FOR A GOOD PRICE.. GOOD LUCK.........
Pull off the passenger side kick pannel and you will see a module that says something like keyless entry or security module. If you have this module you have keyless entry. This answer is based on my 2000 ranger with keyless entry. Mike B Orlando
See www.isuzufaq.com entry 41. "How do I reprogram my keyless entry fob?" The first procedure (turn key 3x, close & open door 2x, turn key 5x, close & open door) worked for my 2002 Rodeo.
Must be programed by a Dealer
Yes.
Mine did.
Must go to a dealer
The module for keyless entry on a 2000 Ford Taurus is located under the driver side dashboard. It is a small box that controls all the functions of the alarm system.
2000 Ford Taurus keyless entry does notwork what could be wrong?
There is no factory reset code for keyless entry on a 2000 Ford Excursion. To find the code, locate the module underneath the dashboard. You may need a borescope to look at the number.